Contact Us+8613814488863


How To Cooperate With Fire Hose

Oct 10, 2020

How to use fire water cannon with fire hose? Sichuan Chuan-Xiao Fire fighting equipment Manufacturing Co., Ltd. know that the fire hose is mainly used to carry high-pressure water may foam and other flame-retardant liquid hose, attack the fire, the first probably immediately alarm, and then quickly opened fire hydrant near the area, and then use the fire hydrant to register the cast aluminum nozzle and the manual alarm device to arrive at the alarm and pneumatic fire hydrant pump intent. So, how to use fire water cannon with fire hose?Fire Hose

Use of fire-fighting water gun: 1, put out the fire hydrant door, take out the hose. 2, check the water belt and joints is not outstanding, if there is damage, stop the use. 3, to the fire direction of the laying of water belt, attention to avoid torsion. 4, the water Belt and fire hydrant connection, the link buckle accurate puncture into the chute, and in a clockwise direction to tighten. 5, after the end of the convergence, at least 2 operators hold water gun, aiming at the source (prohibit the person, avoid high-pressure wounding), another operator slowly opened the fire hydrant valve to the maximum, aimed at the root of the fire to revive, until the fires completely extinguished.Fire Hose

Method One: Applicable to the contrast of the broad local. When the size of the area within 20 meters and one of their own presence, the fire hydrant hose reel can be pulled out of the fire hydrant, the coil in the hose all pull out and put on the floor, counterclockwise direction to unscrew the water supply valve, the left hand palm up to grasp the hose nozzle to the fire direction traction, arrived at the scene of the fire area after the valve switch, water spray to the fire to revive, should pay attention to the size of the fire area is not the power of the electric wire exists, to avoid electric shock endanger the safety of the people.Fire Hose