Contact Us+8613814488863


Industrial Hose Which A Few Kinds Are Divided Into?

Oct 15, 2020

Industrial Hose Hose is an important part of modern industry, the industrial hose shall be used in various gas conveying, infusion piping system and length, temperature, position and angle compensation system as compensating element, sealing element, connecting element and damping element, reducing the internal stress caused by bending under rated bending radius, ensuring the safety of piping system. The following brief introduction of the company's production and operation of various types of industrial hose.

1. Industrial Hose Stainless Steel Metal Hose

Hose is made of 304 stainless steel, with strong corrosion resistance; tube body by the thin-walled stainless steel hydraulic forming, has a strong flexibility, scalability, woven mesh set to strengthen protection, so that it has higher compressive strength, flexibility, can bend to the application of the angle and radius of curvature, suitable for various piping fluid equipment.

Industrial Hose Technical parameters:

Temperature: ≤ 450 ℃;

Pressure: ≤ 1.6Mpa (exceeding customizable);

Media: Water, oil, steam, air and other fluid media.

2. Industrial Hose PTFE Hose

Industrial Hose With excellent and stable chemical properties, non-viscous, corrosion resistance, electrical insulation, anti-aging and excellent swing resistance, the appearance of fine tissue, no mechanical impurities, for conveying high-temperature corrosive medium, can be at-60 ℃-200 ℃ long-term use, suitable for high temperature, corrosion of special working environment.

Industrial Hose Technical parameters:

Temperature: ≤ 200 ℃;

Pressure: ≤ 1.0Mpa (exceeding customizable);

Media: Water, oil, steam, air and other fluid media.

Three, high-pressure steel wire wound hose

Industrial Hose High-pressure steel wire winding hose mainly used in mine hydraulic support, oilfield mining, suitable for engineering construction, lifting transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and industrial sector mechanization, the oil base (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, emulsion, water) and liquid transmission with a certain pressure (high pressure) and temperature in the automatic hydraulic system have excellent oil resistance and heat resistance. Aging resistance.

Industrial Hose Temperature:-40 ℃ ~100 ℃ (oil),-30 ℃ ~50 ℃ (AIR), + 80 ℃ below (emulsion);

Pressure: ≤ 70Mpa;

Industrial Hose Medium: Oil, water.

IV. Siphon

Industrial Hose Siphon hose is one of the form of a siphon connection, according to the characteristics of the baking cylinder design, the use of a hard pipe and a better cut of flexible metal hose composition, the tube and rotary joints in the pipe connection, siphon hose to rely on the weight of the siphon head to the bottom of the baking cylinder, complete the discharge of steam heating after the release of condensation water.

Technical parameters:

Temperature: ≤ 450 ℃;

Pressure: ≤ 1.6Mpa (exceeding customizable);

Media: Water, vapour

Industrial Hose Hose connection form:

Industrial Hose The company produces the hose has a variety of connection forms, easy to install and convenient, the specific form of connection:

1. Industrial Hose Threaded connection

(1) The ball nut connection at both ends;

(2) The two ends of the trumpet nut Connection;

(3) flat-end connections;

(4) A nut (ball type, horn type, flat-head type), one end of the tooth;

2. Industrial Hose Flange connection

(1) Loose flange connection at both ends;

(2) Flat welding flange connection at both ends;

(3) one end loose sleeve flange, one end flat weld flange;

3. Industrial Hose Screw thread and flange

(1) one end flange (loose sleeve/flat welding), one end thread (ball type/speaker type/flat head);

(2) one end loose sleeve flange, one end outer silk tooth;

(3) One end of the welding flange, one end of the outer silk tooth.